Installation Products

Setaflex

FLEXIBLE RAPID SETTING FLOOR & WALL TILE ADHESIVE

DESCRIPTION:

A flexible, fast setting, cement based tile adhesive that has a smooth buttery consistency when simply mixed with water. Setaflex tile adhesive is used primarily onto substrates with limited movement such as underfloor heating, plywood and plaster dry lining. Setaflex is unaffected by frost after setting. When mixed with Setaflex admixture will bond to a wider range of substrates.

COVERAGE: 20kg pack will cover 5 – 6 square metres at 3mm thin bed application.

SIZES: 20kg

COLOURS: Grey and White

ADVANTAGES:

• Flexible fast setting formula
• Ideal for Underfloor heating
• Plywood, Chipboard and Plasterboard
• Walk on and Grout after 3 hours
• Perfect for areas of movement.

Standard Setaflex

FLEXIBLE STANDARD SETTING WALL AND FLOOR TILE ADHESIVE

DESCRIPTION:

A cement based tile adhesive that has a smooth buttery consistency when simply mixed with water. Formulated to give an extended workability for when longer working times are required. Used primarily for tiling to underfloor heating, plywood, plaster dry lining and in areas subject to prolonged wet conditions and condensation, and is unaffected by frost after setting.

COVERAGE: 20kg pack will cover 5 – 6 square metres at 3mm thin bed application.

PACK SIZES: 20kg

COLOURS: Grey and White

ADVANTAGES:

• Flexible
• Ideal where longer working time is required
• Ideal for Underfloor heating.
• Walk on and Grout after 24 – 48 hours
• Perfect for areas of movement
• Single part, just add water
• Ideal for swimming pools and wet rooms

TILES: Porcelain • Slate • Limestone • Quartz • Mosaics • Marble • Composite

SURFACES: Plaster dry lining Panels • Tile backer board • Breeze Block • Plywood • Chipboard • Anhydrite screed

Wide Joint Floor Grout

RAPID SETTING WIDE JOINT FLOOR GROUT – LIMESTONE

DESCRIPTION:

A rapid setting, water resistant, cement based powder wide joint floor grout suitable
for grouting floor tiles on a solid substrate to a joint width between 3mm and 15mm.
Adding Flexmaster additive will increase durability, bond strength and flexibility

COVERAGE: 10kg will cover approx 1.5sq metres

PACK SIZES: 10kg.

COLOURS: Limestone

ADVANTAGES:

• Single part, simply mix with water
• Fast setting
• Light foot traffic after 3 hours
• High wearing durability
• Internal and external locations

FINISHED SURFACES: Ceramics • Natural stone • Marble • Porcelain

APPLICATION SURFACES: Concrete • Asphalt/Bitumen • Power floated floors • Screeds

Matt Finish Sealer

DESCRIPTION:

Sealer which contains solvents and high-grade acrylic resins. It is weather-resistant and non- yellowing.
The colourless acrylic coating provides long-term protection and is water and dirt-resistant. It is used to seal porous and absorbent surfaces. Colours and structures appear more pronounced. On account of the sealed surface, the stone is easier to care for. Preferably used indoors.

COVERAGE: approx 10-20 m2/litre

PACK SIZES: 1 litre, 5 litres

COLOUR: waterclear-transparent

SURFACES: AKEMI Stone Sealer is suited to sealing porous and absorbent natural and cast
stones, marble, granite, slate, slabs from Solnhofen, sandstone, quartzite. terrazzo and fairfaced
concrete in indoor and outdoor use.

Satin Finish Sealer

DESCRIPTION:

Sealer which contains solvents and high-grade acrylic resins. It is weather-resistant and non- yellowing.
The colourless acrylic coating provides long-term protection and is water and dirt-resistant. It is used to seal porous and absorbent surfaces. Colours and structures appear more pronounced. On account of the sealed surface, the stone is easier to care for. Preferably used indoors.

COVERAGE: approx 10-20 m2/litre

PACK SIZES: 1 litre, 5 litres

COLOUR: waterclear-transparent

SURFACES: AKEMI Stone Sealer is suited to sealing porous and absorbent natural and cast
stones, marble, granite, slate, slabs from Solnhofen, sandstone, quartzite. terrazzo and fairfaced
concrete in indoor and outdoor use.