How to Install

Our Reclaimed Brick-Tiles are incredibly easy to install with some careful planning. Follow our step-by-step guide below or check out our installation video to see how it’s done.
  • 01
    Surface prep & marking out
    Remove any loose paint or plaster, and repair any flaking surfaces. Dust down the prepared surface and remove any grease or dirt. Seal the surface with a suitable primer. Mark out level lines using a spirit level on the blank wall surface.
    APPROVED PRODUCT: Anthracite Black Brick-Tiles,
  • 02
    Mix your tile adhesive to the desired consistency applying the adhesive to the surface at a depth of 3-4mm to an area you can cover quickly.
  • 03
    Fit the Reclaimed Brick-tiles
    From the bottom upwards, stick your brick tiles to the desired surface, cutting in where necessary. Stick your second course, using your desired bond pattern and using spacers between courses. Complete the works whilst the adhesive is still workable.
  • 04
    Once all the tiling is complete ensure the tiles are clean and dry then apply the first coat of matt finish sealer to protect the surface of the brick-tile before the grout is applied.
    reclaimed barnstock brick tiles View
  • 05
    If desired, when all the pointing has been completed, brush the whole wall to remove any loose deposits ensuring the surface is clean and dry. Apply a coat of matt finish sealer to the surface of the brick tiles using either a brush or roller.

See how it's Done


Although Reclaimed Brick-Tiles are easy to install if you’re a good diy-er sometimes it can be easier to get the professionals in to guaranteee a quality finish that will last a lifetime.

TCS Contracts are the approved installation contractors for Reclaimed Brick-Tiles. Having worked alongside us for many years they are the go-to experts for a professional installation.

Ask Us

Benefit From


  • Product knowledge and experience
  • Efficient, cost effective service
  • Long term partners & specialists